INOKATSU MTW M4 SOPMOD REVIEW (PREVIEW)

[MCXL]

LOL

Man this thing is a monster, It jams, but instead of bending the nossle or hopup or what ever, it just demolishes bbs.

The hopup is too tight, Im getting some jams/weak fires/double feeds because of it. But i need the one that takes AEG barrels anyway, as I want new inner barrels too.

Man seriously though, one bb found its way into the valve lip on the mag, Like it just got mashed in there, I had to just vent out gas to get it out.

I think the mag lips on this gun need to be redesigned, the true douobble stack thing puts a lot of force on the bb to one side, making it want to crack. I had tis problem on other guns tat are doubble stacked at the lips too.

Maybe RA tech can release one that is doubble stacked until the lips (ala mac 11, or any TM pistol)

Ive counted at least 30 halved bb's .

MONSTER GUN.

I tought maybe it was the bbs i was using. I have now tried my.20s (Either Fidragon Or ksc, couldnt wat was in the loader) and tm tracer 20s.

I god a quad shot off

That was bad.

EDIT:
I was wrong about the flashider, one is 14mm- the other is real steel spec, as is the birdcage they included.

[DOC]

Just got my INO MBK with Colt markings
(together with some other nice bits) fro RA-Tech
It did come with a different hammer lock
and bolt extension for use with WA parts, charging handle,
dust cover, trigger guard, std AR grip and some small parts.

The receiver finish is really a bit shiny but not painted,
seem anodized but of course not Mil-Spec grade...
Something strange since INO claims to use RS parts:
The bolt forward assist is not working in this MBK, its just fake like on AEG´s
Upper and lower seems to be RS quality but on the lowest level,
it looks just like a rebranded Norinco AR receiver.
Also, play between upper and lower is more than just a tad,
I think, I have to use a Accu Wedge to reduce it.
Some other cons: Markings are not deep enough engraved,
pivot pin holes are to large resulting in that receiver play
and casting on the top rail is not very "pleasing to the eye".

All together, build quality of this MBK is rather dissapointing

Otherwise, installation was a breeze, only the part which holds the bolt stop
and "firing pin" needed some fitting. ...gun works great after installation

DOC

[Arion]

Any chances on us having pics?

[Harry]

Some pics?















Everything is OK so far... But for our weather these days (freezing) - this is not the right gun...
And I had some issues with the broken BBs in the HOP unit as well...


Harry

[IBICO]

Where you live Harry?

For me the trades don`t look so bad on those pictures.

[Harry]

Czech Republic... The engravings are not like on real Colt...


Harry

[DOC]

Don´t know if it´s only my MBK but the Magpul enhanced trigger guard doesn´t fit
The MP trigger guard have 11mm width, where the space on the INO lower is only 10,9mm.
I think I go the hard way and mill away that 0.1mm at that area to achieve RS specs,
instead of modding the trigger guard...

DOC

[GBBNut]

Yeah. Use a small hand file and widen the gap on the metal body. I like to avoid modifying real parts when possible.

[erichaitran]

ya, so i was getting ready to pester the people at redwolf some more about the delay on my ino, and noticed that they took it off preorder yesterday, and labeled it as ENHANCED VERSION. Apparently they said its like a version 2 where some of the "problems" were fixed. any one got any good sources that can say whether or not this is true, and if so, then what was fixed?

[Stinger]

Just got mine from Redwolf ...